Electrician in Cranbourne, VIC
Electrical work in Cranbourne
Cranbourne has been the market town for this side of Western Port since the 1850s. Its centre is still the wide boulevard of High Street, which is also the South Gippsland Highway, with the Cranbourne Park shopping centre and the old shire office of 1875 at the Sladen Street corner. The racecourse and the Royal Botanic Gardens lie on the south side. The work sits in the older streets around High Street and in the estates that have grown out towards Cranbourne East.
In the older streets the houses stand on their own blocks with side gates and a meter box on the side wall. The highway is busy, so we usually park in a side street and walk in. In the newer estates the garage faces the street and the board is often inside it, or on the wall beside it. Tell us whether you are home, or whether an agent holds the key.
The older streets belong to a town proclaimed in 1861, with a railway from 1887, so houses here run from early in the town to the post-war years, with wiring added to as each family moved in. The newest estates in Cranbourne East began land division in 2008, including Cascades on Clyde, so there is wiring of much more recent date too. What we find depends on the street, so we check and do not assume.
What we do here most
What an old market town and its new estates keep needing
Two ages of house sit side by side. The older ones need faults traced and boards relieved, and the newer ones want extras the builder left out.
Electrical Repair
A dead room in an older house
Older houses near High Street have had rooms added, and a dead room usually means a joint or a point somewhere along an extended circuit. We start at the board, test the circuit and work out from there to the first point that has no supply. Joints are often in the roof space or under the floor, so we ask for access to both before we start.
Circuit Breaker Replacement
A breaker that trips on a shared circuit
A breaker that trips whenever a kettle and a heater run together is usually doing its job, because an old circuit was never sized for both. We check what is on the circuit before changing anything. If it is overloaded, the answer is more circuits, not a bigger breaker, and we explain which.
New Build Electricals
A new house on a Cranbourne East estate
On the estates that grew out from the town from 2008, builders hand over a house with the basics fitted. Owners then ask for more: outdoor lights, a power point for a garage workbench, a feed to an alfresco. If you are still at the plan stage, tell us before the walls are lined, because cable is easiest to run then.
Appliance Installation
A second fridge and a dryer in the garage
In older houses the garage often has a single power point, shared with the lights or the kitchen. A garage fridge and a dryer on that point can overload it. We check what else the circuit feeds, and where it is already near its limit, a new circuit from the board is cleaner and safer than a double adaptor.
If it is urgent
If the power drops in Cranbourne
- 1Check whether the neighbours have lost power as well, and look at your board for a tripped breaker or safety switch.
- 2Leave any power point that is hot, buzzing or marked with burn alone, and do not reset a breaker that trips straight back.
- 3When you call, tell us the street, whether it is an older house or a newer estate, where the board is, and whether the gate will be open. We answer the phone at any hour, every day.
Common questions
Frequently Asked Questions
What electrical services do you provide?
We do domestic and commercial electrical work. That covers repairs, circuit breaker replacement, switches, outlets, lighting, appliance installation, switchboard upgrades, safety inspections, car chargers, renovations and new builds. The services page lists each one.
What happens when I call?
You describe what is going on: which room, what the power was doing, and whether a breaker has tripped. We ask a few questions and tell you what we think it is and what the next step is. If it is urgent, we say so and deal with that first.
Do you do emergency callouts at any hour?
Yes. We answer the phone at any hour, every day, and emergency callouts run at any hour too. If something smells hot, a switch is sparking or the power will not come back, call rather than send a message.
Do you handle new builds and renovations?
Yes. For a new build we work through the electrical from the switchboard out, including power points, lighting and cabling for appliances, data and security. For a renovation we work around what is already in the walls, and we coordinate with the builder where there is one.
Can you upgrade the switchboard in my older home?
Yes. Older switchboards often struggle with the load of modern appliances and can be a safety risk. We open the board, look at what is there and tell you what needs replacing, whether that is a few breakers or the whole board.
How often should I have an electrical inspection?
About every 5 years for a standard home. Have one sooner when you are buying a property, when the home has outdated wiring, or when breakers trip often. We check the wiring, the switchboard and the circuit breakers, and you get a plain report with recommendations.
Can you install an electric car charger?
Yes. We start with a consultation on your property's electrical system to decide where the charger should go and what suits your car. If the switchboard or wiring needs work to carry it, we do that as part of the job, then test the charger and show you how it works.
Do you install and replace lights?
Yes, inside and out. That includes downlights, pendants, wall lights, LED upgrades, and outdoor and garden lighting. We can also fit switches and dimmers to go with them.
Can you add or replace outlets and switches?
Yes. We fit new outlets where you need them, swap worn or faulty ones, and replace switches. If an outlet keeps failing, we check the circuit behind it rather than just changing the faceplate.
Do you connect ovens, dishwashers and other appliances?
Yes. That includes ovens, cooktops, rangehoods, dishwashers, washing machines and dryers. Some need their own circuit or a hardwired connection, and we set that up and test it. We can take the old appliance away on request.
What should I send with an enquiry?
Photos help. A shot of the switchboard with the cover open (only if you can do it safely), the faulty fitting, or the room where you want the work done. Add a line on what happened just before it stopped.
Which areas do you cover, and what if my suburb is not listed?
We work across Melbourne and the surrounding areas: the south-east, Casey and Cardinia, plus Box Hill, Hampton and South Yarra. The service areas page lists the places we work most often. If yours is not there, call and tell us the suburb, because the list is not a boundary.
Everything we do here
Services in Cranbourne, VIC
These are the services we offer across Cranbourne, from the older streets around High Street to the newer estates on its edge.
Also nearby
We work in these suburbs too
Local, and on the phone
Electrical work in Cranbourne
Tell us whether the house is in the older part of town or on a newer estate, and where the board is. That decides what we expect to find and how we plan the visit.
0432 167 19624 hours a day, 7 days a week
Not urgent? Send us the job instead