Electrician in Clyde, VIC
Electrical work in Clyde
The old township of Clyde is a small triangle between Twyford Road, Clyde-Five Ways Road and Ballarto Road, with a primary school that opened in 1910, a CFA station, a general store and a community hall. Around it, farmland and dairying are giving way to estates such as Five Farms and Evergreen, and the main shops are at the corner of Berwick-Cranbourne Road and Morison Road. The work sits in two places: the few old houses of the township, and the new houses of the estates.
On the newer estates the house is new, the meter box is on an outside wall and access is rarely the problem. The questions are whether the house is occupied or still with the builder, and who holds the key. In the old township and on farm blocks nearby, driveways are longer and gravel, and the board can be on an outbuilding. Roads are still being built and named, so we ask for the street name as well as the number.
Most houses in Clyde were built within the last decade or so, and the wiring in them is modern. That changes the work. It is rarely about old cable and more often about what the builder did not fit, such as extra outdoor lights, power points for an alfresco or a garage, or a car charger. The few old buildings in the township were wired in other times, and we treat them as a different job.
What we do here most
What a fast-growing township keeps needing
New houses are wired to a modern board, but owners start adding as soon as they move in, and the old township buildings are a different job.
New Build Electricals
Fitting out a house still with the builder
A builder hands over a house with the basics fitted, and owners then find what is missing: outdoor lights, a power point on the garage bench, a feed to the alfresco. If you are still at the plan stage, tell us before the walls are lined, because cable is easiest to run then. After that, every extra point is a cut in finished plaster.
Car Chargers
A charger for a garage on a new estate
A new estate house usually has a garage built in, with the board near it, so a wall charger is often a short run. We check what the board can carry first, because a charger will run for hours while the oven and the heater are on. The consultation settles where the unit sits, which board feeds it, and whether the board has a spare way.
Appliance Installation
Connecting a cooktop and oven to a new kitchen
In a new house the oven and cooktop are often supplied by the owner after handover, and the kitchen circuit has been run in the builder's standard way. We check the rating of that circuit against the appliance before connecting it. If you change to a bigger cooktop later, tell us, because the circuit may need to change.
Electrical Repair
A tripping safety switch in a township house
A house in the old township may have wiring from several eras. A safety switch that trips in wet weather points at moisture in an outdoor point or a shed circuit, and one that trips on its own points at a fault inside. We test the circuits one at a time to find which, and repair that circuit, not the whole board.
If it is urgent
If the power drops in Clyde
- 1Check whether the street is dark or only your house, and look at your board for a tripped breaker or safety switch.
- 2Leave the board alone if there is a burning smell or water near it, and do not reset a breaker that trips straight back.
- 3When you call, give the street name as well as the number, because new estates are not always on every map, and tell us whether the house is occupied and who has the gate key. We answer the phone at any hour, every day.
Common questions
Frequently Asked Questions
What electrical services do you provide?
We do domestic and commercial electrical work. That covers repairs, circuit breaker replacement, switches, outlets, lighting, appliance installation, switchboard upgrades, safety inspections, car chargers, renovations and new builds. The services page lists each one.
What happens when I call?
You describe what is going on: which room, what the power was doing, and whether a breaker has tripped. We ask a few questions and tell you what we think it is and what the next step is. If it is urgent, we say so and deal with that first.
Do you do emergency callouts at any hour?
Yes. We answer the phone at any hour, every day, and emergency callouts run at any hour too. If something smells hot, a switch is sparking or the power will not come back, call rather than send a message.
Do you handle new builds and renovations?
Yes. For a new build we work through the electrical from the switchboard out, including power points, lighting and cabling for appliances, data and security. For a renovation we work around what is already in the walls, and we coordinate with the builder where there is one.
Can you upgrade the switchboard in my older home?
Yes. Older switchboards often struggle with the load of modern appliances and can be a safety risk. We open the board, look at what is there and tell you what needs replacing, whether that is a few breakers or the whole board.
How often should I have an electrical inspection?
About every 5 years for a standard home. Have one sooner when you are buying a property, when the home has outdated wiring, or when breakers trip often. We check the wiring, the switchboard and the circuit breakers, and you get a plain report with recommendations.
Can you install an electric car charger?
Yes. We start with a consultation on your property's electrical system to decide where the charger should go and what suits your car. If the switchboard or wiring needs work to carry it, we do that as part of the job, then test the charger and show you how it works.
Do you install and replace lights?
Yes, inside and out. That includes downlights, pendants, wall lights, LED upgrades, and outdoor and garden lighting. We can also fit switches and dimmers to go with them.
Can you add or replace outlets and switches?
Yes. We fit new outlets where you need them, swap worn or faulty ones, and replace switches. If an outlet keeps failing, we check the circuit behind it rather than just changing the faceplate.
Do you connect ovens, dishwashers and other appliances?
Yes. That includes ovens, cooktops, rangehoods, dishwashers, washing machines and dryers. Some need their own circuit or a hardwired connection, and we set that up and test it. We can take the old appliance away on request.
What should I send with an enquiry?
Photos help. A shot of the switchboard with the cover open (only if you can do it safely), the faulty fitting, or the room where you want the work done. Add a line on what happened just before it stopped.
Which areas do you cover, and what if my suburb is not listed?
We work across Melbourne and the surrounding areas: the south-east, Casey and Cardinia, plus Box Hill, Hampton and South Yarra. The service areas page lists the places we work most often. If yours is not there, call and tell us the suburb, because the list is not a boundary.
Everything we do here
Services in Clyde, VIC
These are the services we offer across Clyde, mostly for new houses that need more than the builder fitted, and for the old township.
Also nearby
We work in these suburbs too
Local, and on the phone
Electrical work in Clyde
Tell us whether the house is new or in the old township, and whether you are at the plan stage, the handover or already living in it. That decides what we expect to find and what we need to see.
0432 167 19624 hours a day, 7 days a week
Not urgent? Send us the job instead